About this product
Silicone Heat Transfer Logo For Clothing is a molded silicone brand mark supplied on carrier film and attached to fabric by heat press. It is used on sportswear, activewear, jackets, bags, caps and apparel accessories for chest, sleeve, pocket and panel branding.
Specifications
|
Specification |
Details |
|
Material |
Flexible silicone on PET carrier film |
|
Logo Structure |
2D, 3D, single-layer or multi-layer construction |
|
Finished Thickness |
0.5-2.0 mm |
|
Raised Height |
0.3-1.5 mm |
|
Color Capacity |
Up to 6 colors per design |
|
Typical Size Range |
10-150 mm |
|
Minimum Line Width |
0.8 mm |
|
Heat-Press Temperature |
150-160 degrees C |
|
Pressing Time |
10-15 seconds |
|
Pressing Pressure |
4-5 bar |
|
Carrier Release |
Cold peel after full cooling |
Use details
The raised silicone surface gives chest marks, sleeve logos and bag branding a stronger tactile profile, so the logo stands out where flat printing has limited depth.
Flexible silicone bends with stretch garments and soft bag panels, keeping corners and narrow logo sections neat through wearing, folding and packing.
Carrier-film positioning holds separate letters and cutout details in place during heat pressing, improving logo alignment across bulk garment production.
Custom order notes
Logo Artwork:
Brand mark, wordmark, icon, badge-style logo and decorative graphic.
Size and Shape:
Amall chest logo, sleeve mark, bag logo, cap logo and shaped transfer formats.
Color and Finish:
Matte, gloss, single-color, multi-color and contrast edge effects.
Layer and Thickness:
Flat raised logo, thicker silicone layer and multi-layer 3D logo effect.
Packing:
Transfer sheets, sorted logo sets, plastic bags, cartons and barcode labels.
Factory checks
Inspection covers logo edge definition, silicone layer thickness, color matching, carrier-film alignment, transfer sheet cleanliness, adhesion after pressing, stretch movement and wash stability. Samples are approved before bulk production to lock the logo size, color and heat-transfer result.
Questions before ordering
Q: Can the logo be applied over a garment seam?
A: A flat panel gives the most even bond; seams, pockets and raised textures require a separate placement test.
Q: How is the raised height selected?
A: Height is selected from the logo size, line width, fabric flexibility and required tactile contrast.
Q: What causes logo corners to lift after pressing?
A: Corners can lift when the fabric surface is contaminated, the pressure is uneven or the transfer setting does not match the fabric.
Q: When should a multi-layer logo be used?
A: Multi-layer construction is used when the design needs separated color levels, a stronger 3D profile or distinct raised and recessed sections.
Hot Tags: silicone heat transfer logo for clothing, China silicone heat transfer logo for clothing manufacturers, suppliers, factory, Faux Leather Labels, Folded Woven Labels, Loop Fold Labels, Manhattan Fold Woven Neck Label, Straight Cut Woven Labels, Woven Label Both Ends Folded
