About this product
Embroidery Heat Transfer Patches are embroidered fabric patches with a hot-melt backing that bonds to the garment under heat and pressure. They are used on uniforms, jackets, denim, teamwear, repair projects and cotton or polyester garments that require embroidered decoration without routine sewing.
Specifications
|
Specification |
Details |
|
Base Fabric |
Polyester twill or felt |
|
Embroidery Thread |
100% polyester embroidery thread, 120D/2 |
|
Embroidery Coverage |
50%, 75% or 100% |
|
Thread Colors |
Up to 12 colors per design |
|
Typical Size Range |
20-200 mm |
|
Minimum Text Height |
4 mm |
|
Edge Finish |
Merrowed border, satin-stitch border or laser-cut edge |
|
Adhesive Backing |
Full-back hot-melt film |
|
Heat-Press Temperature |
150-170 degrees C |
|
Pressing Time |
15-20 seconds |
|
Pressing Pressure |
3-5 bar |
|
Compatible Fabrics |
Cotton, polyester and denim; coated or stretch fabrics require sample testing |
Use details
The hot-melt backing allows embroidered patches to be applied by heat press or household iron, reducing sewing work on uniforms, denim and promotional apparel.
Dense thread coverage keeps logos and lettering visible on high-contact garment areas, so the embroidered face stays clear during daily use.
Full-back adhesive coverage and controlled edge finishing help the patch lie flat after pressing, reducing corner lifting on badges and shaped logo applications.
Custom order notes
|
Custom Item |
Scope |
|
Artwork |
Logo, lettering, team badge, brand icon or repair-decorative shape |
|
Patch Size & Shape |
Round, shield, rectangle, custom outline or irregular logo shape |
|
Thread Colors |
PMS-matched thread combinations and embroidered detail levels |
|
Edge Finish |
Merrowed edge, satin stitch border or laser-cut edge |
|
Heat-Transfer Backing |
Full-back hot-melt film for press application |
|
Packing |
Individual polybag, backing card, set packing or carton packing |
Factory checks
Quality checks cover stitch density, thread trimming, hot-melt film coverage, backing alignment, edge shape and color consistency. Sample pressing is used to check heat-bond performance, edge lifting and patch flatness on the intended fabric type before bulk production.
Questions before ordering
Q: Why do coated fabrics require a pressing test?
A: Waterproof and low-surface-energy coatings can block the hot-melt film from reaching the fabric fibers and reduce bond strength.
Q: What causes patch corners to lift after pressing?
A: Uneven pressure, insufficient heating, a contaminated fabric surface or an edge not fully covered by the press can cause lifting.
Q: Can a heat-transfer patch be applied across a seam?
A: Seams create uneven thickness and pressure, so the patch should be positioned on a flat panel whenever possible.
Q: Can a pressed patch be repositioned?
A: Heat-activated backing is not designed for repositioning; reheating and removal can distort the patch or leave adhesive on the garment.
Hot Tags: embroidery heat transfer patches, China embroidery heat transfer patches manufacturers, suppliers, factory, Embroidered Sew On Patches, Iron On Embroidered Patch, Embroidered Garment Labels, Iron On Embroidered Badges, Luminous Embroidered Patches, Embroidered Velcro Badge
